HVAC Duct and Pipe Insulation Removal in Huntington Beach

Typical cost in Huntington Beach

  • Duct wrap at the furnace or a few duct joints$1,200 – $3,000+
  • All attic ducts in a house, removal only (new ducts extra)$2,500 – $6,500+
  • Pipe or boiler insulation, up to about 50 ft$1,000 – $2,500+

Under the South Coast Air Quality Management District’s rule, installing or removing heating, ventilation and air conditioning systems counts as renovation. The old duct wrap, tape and pipe insulation become part of the survey for that job.

Duct wrap and pipe insulation may contain asbestos, so samples come before the HVAC crew starts. If a sample comes back positive, we remove that material so the change-out can go ahead.

Request a free quote
Attic with silver-gray foil-wrapped round ducts along the rafters, plank flooring, loose insulation at the sides and light from a small vent window.

Insulation we remove

Attic duct wrap

Ducts that run through an attic may be wrapped in foil, insulation or tape. The wrap and the seams are sampled, and positive material comes off before the ducts are replaced.

Furnace closet and duct collar

A hall closet furnace may have tape or board around the duct collar. Those materials are sampled before the unit comes out, so the old furnace is not the only thing on the plan.

Pipe insulation

Wrapped pipes in a garage, a closet or a wall are sampled along their length. We remove the sections that test positive and leave the plumbing to your plumber.

Whole-system replacement

A full change-out of the furnace and ducts is renovation from start to finish. The survey, the notice and any removal go on the schedule before the new system arrives.

Planning around the change-out

Insulation removal and an HVAC change-out depend on each other, so the order of work matters.

Scheduling with your installer

A district notice has to be in no later than 10 working days before renovation work begins, unless the job is a renovation of a residential single-unit dwelling that removes less than 100 square feet of surface area of asbestos-containing material. Ask your heating and air contractor to leave that time in the schedule, along with time for the survey.

Who can do the removal

The state’s C-22 Asbestos Abatement classification covers abatement, including containment, encapsulation or removal, and disposal. For work of 100 square feet or more, ask any company for its license number and check it with the Contractors State License Board.

After removal

Clearance air testing, when a job calls for it, belongs to an independent consultant. California law keeps contractors from doing clearance air monitoring, so our crew stays out of that step.

Empty closet alcove with a metal duct box at the top edge, a gray panel against the back wall and clear plastic on the floor.

Testing is the first step, so see asbestos testing and surveys, or return to the overview for the rest of what we do.

Request a free asbestos removal quote

We recommend calling, but do feel free to contact us using this form. We'll get back to you with a free, personalized quote or additional questions as soon as possible. We're here to help.

Call (657) 301-3488

Call (657) 301-3488